HP 5900 series Command Reference

Table 18 Command output
Field Descri
p
tion
Multicast VLAN 100 Forwarding Table Forwarding table for multicast VLAN 100.
Total 1 entries, 1 matched
Total number of forwarding entries, and the number of matching
entries.
00001 Sequence number of the (S, G) entry.
(1.1.1.1, 255.0.0.1)
(S, G) entry, where 0.0.0.0 in the S position means any multicast
sources.
Flags
Current status of the (S, G) entry. Different bits represent different
states of the entry. For values of this field, see Table 19.
List of sub-VLANs (3 in total)
Sub-VLAN list of the multicast VLAN, and the total number of the
sub-VLANs.
Table 19 Values of the Flags field
Value Meanin
g
0x1 The entry is in inactive state.
0x4 The entry fails to update.
0x8 The sub-VLAN information fails to update for the entry.
0x200 The entry is in GR state.
0x10000 The entry is a forwarding entry for a multicast VLAN.
multicast-vlan
Use multicast-vlan to configure a multicast VLAN and enter multicast VLAN view.
Use undo multicast-vlan to remove a multicast VLAN.
Syntax
multicast-vlan vlan-id
undo multicast-vlan { all | vlan-id }
Default
A VLAN is not configured as a multicast VLAN.
Views
System view
Predefined user roles
network-admin
Parameters
vlan-id: Specifies a VLAN ID in the range of 1 to 4094.
all: Specifies all multicast VLANs.
58

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)