HP 5900 series - Display Pim Rp-Info

132
Field Descri
p
tion
Flag
Flag of the (S, G) entry or (*, G) entry:
• ACT—The entry has been used for routing data.
• DEL—The entry will be removed.
• EXPRUNE—Some outgoing interfaces are pruned by other multicast
routing protocols.
• EXT—The entry contains outgoing interfaces provided by other
multicast routing protocols.
• LOC—The entry is on a router directly connected to the same subnet
with the multicast source.
• NIIF—The entry contains unknown incoming interfaces.
• NONBR—The entry has a PIM neighbor lookup failure.
• RPT—The entry is on an RPT branch where (S, G) prunes have been
sent to the RP.
• SPT—The entry is on the SPT.
• T-to-SPT switchover. SWT—The entry is in the process of RP
• WC—The entry contains a wildcard.
Uptime Length of time since the (S, G) entry or (*, G) entry was installed.
Upstream interface Upstream (incoming) interface of the (S, G) entry or (*, G) entry.
Upstream neighbor Upstream neighbor of the (S, G) entry or (*, G) entry.
RPF prime neighbor
RP neighbor of the (S, G) or (*, G) entry: F
• For a (*, G) entry, if the RPF neighbor is the RP, the field displays NULL.
• For an (S, G) entry, if the RPF neighbor is a router t
to the multicast source, this field displays NULL.
hat directly connects
Downstream interface(s)
information
:
.
aces.
• Expiration time of the downstream interfaces.
Information about the downstream interfaces
• Total number of downstream interfaces
• Names of the downstream interfaces.
• Protocol type on the downstream interf
• Uptime of the downstream interfaces.
Use display pim rp-info to display RP information in the PIM-SM domain.
Syntax
display pim [ vpn-instance vpn-instance-name ] rp-info [ group-address ]
Views
Predefine
network-operator
display pim rp-info
Any view
d user roles
network-admin