HP 5900 series - Bsm-Fragment Enable (PIM View); Bsr-Policy (PIM View)

114
bsm-fragment enable (PIM view)
Use bsm-fragment enable to enable bootstrap message (BSM) semantic fragmentation.
Use undo bsm-fragment enable to disable BSM semantic fragmentation.
Syntax
bsm-fragment enable
undo bsm-fragment enable
Default
BSM semantic fragmentation is enabled.
Views
PIM view
Predefined user roles
network-admin
Usage guidelines
Disable BSM semantic fragmentation if the PIM-SM domain contains a device that does not support this
feature.
Examples
# Disable BSM semantic fragmentation on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] undo bsm-fragment enable
bsr-policy (PIM view)
Use bsr-policy to configure a BSR policy to define the legal bootstrap router (BSR) address range.
Use undo bsr-policy to remove the configuration.
Syntax
bsr-policy acl-number
undo bsr-policy
Default
BSR policies are not configured, and bootstrap messages from any multicast sources are regarded valid.
Views
PIM view
Predefined user roles
network-admin
Parameters
acl-number: Specifies an IPv4 basic ACL by its number in the range of 2000 to 2999.