HP 5900 series Command Reference

Examples
onds on VLAN-interface 100.
[Sysname] interface vlan-interface 100
3
t-size (IPv6 PIM view)
o set the maximum size of each join/prune message.
ize to restore the default.
undo jp-pkt-size
Default
size of a join/prune message is 8100 bytes.
Views
PIM view
Predefine
twork-admin
Paramete
e of each join/prune message, in the range of 100 to 64000 bytes.
Examples
essage to 1500 bytes on the public network.
[Sysname] ipv6 pim
ter-policy (IPv6 PIM view)
re an IPv6 PIM register policy.
icy to remove the configured IPv6 PIM register policy.
undo register-policy
Default
ter policies are not configured.
Views
PIM view
# Set the triggered hello delay to 3 sec
<Sysname> system-view
[Sysname-Vlan-interface100] ipv6 pim triggered-hello-delay
jp-pk
Use jp-pkt-size t
Use undo jp-pkt-s
Syntax
jp-pkt-size size
The maximum
IPv6
d user roles
ne
rs
size: Sets the maximum siz
# Set the maximum size of each join/prune m
<Sysname> system-view
[Sysname-pim6] jp-pkt-size 1500
regis
Use register-policy to configu
Use undo register-pol
Syntax
register-policy acl6-number
IPv6 PIM regis
IPv6
337

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)