Table 86 Command output
Fields Descri
tion
Group IPv6 multicast group address.
Source list List of IPv6 multicast source addresses.
last-listener-query-count (MLD view)
Use last-listener-query-count to set the MLD global last listener query count.
Use undo last-listener-query-count to restore the default.
Syntax
mld last-member-query-count count
undo mld last-member-query-count
Default
The MLD last listener query count equals the MLD querier's robustness variable.
Views
MLD view
Predefined user roles
network-admin
Parameters
count: Sets an MLD last listener query count in the range of 1 to 255.
Usage guidelines
This command and the mld last-listener-query-count command have the same function but different
effective ranges:
• The last-listener-query-count command in MLD view takes effect on all interfaces.
• The mld last-listener-query-count command takes effect on the current interface.
For an interface, the mld last-listener-query-count command takes priority over the
last-listener-query-count command in MLD view.
Examples
# Set the global MLD last listener query count to 6 on the public network.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] last-listener-query-count 6
Related commands
mld last-listener-query-count
last-listener-query-interval (MLD view)
Use last-listener-query-interval to set the MLD last listener query interval globally.
Use undo last-listener-query-interval to restore the default.
279
To Next Page
Loading...
Need help?
General
