HP 5900 series Command Reference

Syntax
holdtime join-prune time
undo holdtime join-prune
Default
ed/pruned state holdtime timer is 210 seconds.
Views
PIM view
Predefine
min
Paramete
Usage guide
timer for all interfaces in IPv6 PIM view or for the current
terface in interface view. The configuration made in interface view takes priority over the configuration
ade in IPv6 PIM view.
to be less
te holdtime timer.
Examples
bal joined/pruned state holdtime timer to 280 seconds on the public network.
e 280
ds
6 pim holdtime join-prune
ipv6 p
Pv6 PIM view.
n-instance vpn-instance-name ]
[ vpn-instance vpn-instance-name ]
Views
em view
Predefine
The global join
IPv6
d user roles
network-ad
rs
time: Sets a joined/pruned state holdtime timer in the range of 1 to 65535 seconds.
lines
You can set the joined/pruned state holdtime
in
m
To prevent the upstream neighbors from aging out, you must configure the join/prune interval
than the joined/pruned sta
# Set the glo
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] holdtime join-prun
Related comman
• ipv
• timer join-prune (IPv6 PIM view)
im
Use ipv6 pim to enter IPv6 PIM view.
Use undo ipv6 pim to remove all configurations in I
Syntax
ipv6 pim [ vp
undo ipv6 pim
Syst
d user roles
network-admin
324

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)