FSM information: normal
Host slots (0 in total):
Host ports (1 in total):
XGE1/0/2
Table 62 Command output
Field Descri
tion
Total 1 entries Total number of static MLD snooping forwarding entries.
VLAN 2: Total 1 entries Total number of static MLD snooping forwarding entries in VLAN 2.
(::, FF1E::101)
(S, G) entry, where a double colon (::) in the S position means any IPv6 multicast
sources.
Attribute
Entry attribute:
• global port—The entry has a global port.
• local port—The entry has a port that resides on the specified device.
• slot—The entry has a port that resides on a device other than the specified
device.
FSM information
Finite state machine information of the entry:
• delete—The entry attributes have been deleted.
• dummy—The entry is a new temporary entry.
• no info—No entry exists.
• normal—The entry is a correct entry.
Host slots (0 in total)
Member IDs of the member devices that have member ports and the total number
of the member devices (excluding the specified member device).
Host ports (1 in total) Member ports, and the total number of the member ports.
display mld-snooping static-router-port
Use display mld-snooping static-router-port to display static router port information.
Syntax
display mld-snooping static-router-port [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays static router port information on the master device.
Examples
# Display static router port information for VLAN 2.
203
To Next Page
Loading...
Need help?
General
