HP 5900 series - Ipv6 Pim Timer Graft-Retry

Syntax
ipv6 pim state-refresh-capable
undo ipv6 pim state-refresh-capable
Default
h feature is enabled.
Views
terface view
Predefine
Examples
ate refresh on VLAN-interface 100.
0
pim state-refresh-capable
Related c
view)
view)
ipv6 p
t a graft retry timer.
try to restore the default.
undo ipv6 pim timer graft-retry
Default
econds.
Views
rface view
Predefine
twork-admin
Paramete
imer in the range of 1 to 65535 seconds.
Examples
# Set the graft retry timer to 80 seconds on VLAN-interface 100.
[Sysname] interface vlan-interface 100
80
The state refres
In
d user roles
network-admin
# Disable st
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface100] undo ipv6
ommands
• state-refresh-hoplimit (IPv6 PIM
• state-refresh-interval (IPv6 PIM
• state-refresh-rate-limit (IPv6 PIM view)
im timer graft-retry
Use ipv6 pim timer graft-retry to se
Use undo ipv6 pim timer graft-re
Syntax
ipv6 pim timer graft-retry interval
The graft retry timer is 3 s
Inte
d user roles
ne
rs
interval: Sets a graft retry t
<Sysname> system-view
[Sysname-Vlan-interface100] ipv6 pim timer graft-retry
334