HP 5900 series - Startup-Query-Count (IGMP View); Startup-Query-Interval (IGMP View)

startup-query-count (IGMP view)
Use startup-query-count to set the global IGMP startup query count.
Use undo startup-query-count to restore the default.
Syntax
startup-query-count count
undo startup-query-count
Default
The global IGMP startup query count equals the IGMP querier's robustness variable.
Views
IGMP view
Predefined user roles
network-admin
Parameters
count: Sets an IGMP startup query count in the range of 1 to 255.
Usage guidelines
This command and the igmp startup-query count command have the same function but different effective
ranges:
• The startup-query-count command in IGMP view takes effect on all interfaces.
• The igmp startup-query count command takes effect on the current interface.
For an interface, the igmp startup-query count command takes priority over the startup-query-count
command in IGMP view.
Examples
# Set the global IGMP startup query count to 5 on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] startup-query-count 5
Related commands
igmp startup-query-count
startup-query-interval (IGMP view)
Use startup-query-interval to set the global IGMP startup query interval.
Use undo startup-query-interval to restore the default.
Syntax
startup-query-interval interval
undo startup-query-interval
Default
The global IGMP startup query interval equals one quarter of the IGMP general query interval.
110