Total entry active event sent: 0
Total entry inactive event sent: 0
0
suppress timeout: 0
Table 78 Command output
Total NoCache event sent: 2
Total NoCache event dropped:
Total WrongIF event sent: 0
Total WrongIF event dropped: 0
Total SPT switch event sent: 0
NoCache rate limit: 1024 packets/s
WrongIF rate limit: 1 packets/10s
Total timer of register
Field Descri
tion
Total entry active event sent Number of times that the entry-active event has been sent.
Total entry inactive event sent t. Number of times that the entry-inactive event has been sen
Total NoCache event sent Number of times that the NoCache event has been sent.
Total NoCache event dropped ed.Number of times that the NoCache event has been dropp
Total WrongIF event sent Number of times that the WrongIF event has been sent.
Total WrongIF event dropped d. Number of times that the WrongIF event has been droppe
Total SPT switch event sent sent. Number of times that the SPT-switch event has been
NoCache rate limit Rate limit for sending the NoCache event, in pps.
WrongIF rate limit
for sending the WrongIF event, in packets per 10 Rate limit
seconds.
Total timer of register suppress timeout
mes that the registration suppression has timed
out in total.
Number of ti
Related c
reset ipv6 multicast forwarding event
Use display ipv6 multicast forwarding-table to display IPv6 multicast forwarding entries.
Syntax
erface { exclude | include | match } interface-type interface-number |
slot slot-number | statistics ] *
Views
Predefine
network-operator
ommands
display ipv6 multicast forwarding-table
display ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding-table [ ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] | incoming-interface interface-type
interface-number | outgoing-int
Any view
d user roles
network-admin
260
To Next Page
Loading...
Need help?
General
