Field Descri
tion
10.1.1.2 IP address of the PIM snooping neighbor.
Ports (1 in total) Ports that have PIM snooping neighbors, and the total number of the ports.
(02:02:23)
Remaining aging timer for a PIM snooping neighbor on the port.
• For a global port, this field is always displayed.
• For a non-global port, this field is displayed if the port is on the master
device. Otherwise, you must specify the slot slot-number option to display
this field.
LAN Prune Delay
The PIM hello message sent by the PIM snooping neighbor has the
LAN_Prune_Delay option.
(T)
The join message suppression feature has been disabled for the PIM snooping
neighbor.
display pim-snooping router-port
Use display pim-snooping router-port to display PIM snooping router port information.
Syntax
display pim-snooping router-port [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN in the range of 1 to 4094. If you do not specify a VLAN, the command
displays PIM snooping router port information for all VLANs.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays PIM snooping router port information on the master
device.
Examples
# Display PIM snooping router port information for VLAN 2.
<Sysname> display pim-snooping router-port vlan 2
VLAN 2:
Router slots (0 in total):
Router ports (2 in total):
XGE1/0/1 (00:01:30)
XGE1/0/2 (00:01:32)
Table 12 Command output
Field Descri
tion
VLAN 2 VLAN ID.
47