HP 5900 series Command Reference

2: Vlan-interface3
Table 29 Command output
Field Descri
p
tion
Total 1 entry Total number of (S, G) entries.
00001 Sequence number of the (S, G) entry.
(172.168.0.2, 227.0.0.1) (S, G) entry.
Uptime Length of time for which the (S, G) entry has been up.
Upstream Interface
Upstream interface of the (S, G) entry that multicast packets should
arrive at.
List of 2 downstream interfaces List of downstream interfaces that need to forward multicast packets.
Related commands
reset multicast routing-table
display multicast routing-table static
Use display multicast routing-table static to display static multicast routing entries.
Syntax
display multicast [ vpn-instance vpn-instance-name ] routing-table static [ source-address { mask-length
| mask } ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays static multicast routes
on the public network.
source-address: Specifies a multicast source address.
mask-length: Specifies an address mask length in the range of 0 to 32.
mask: Specifies an address mask.
Usage guidelines
This command displays information about only valid static multicast routes.
Examples
# Display static multicast routing entries on the public network.
<Sysname> display multicast routing-table static
Destinations: 3 Routes: 4
Destination/Mask Pre RPF neighbor Interface
75

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)