HP 5900 series - Ipv6 Pim Bfd Enable

Paramete
es an MPLS L3VPN instance by its name, a case-sensitive string
u do not specify a VPN instance, you enter public network IPv6 PIM view.
Examples
# Enable IPv6 multicast routing in VPN instance mvpn and enter IPv6 PIM view of VPN instance mvpn.
routing vpn-instance mvpn
ipv6 pim bfd enable
ble BFD for IPv6 PIM.
Use undo ipv6 pim bfd enable to disable BFD for IPv6 PIM.
Syntax
ipv6 pim bfd enable
fd enable
or IPv6 PIM.
terface view
user roles
Usage gu
v6 PIM-DM or IPv6 PIM-SM is enabled on the interface.
Examples
uting, enable IPv6 PIM-DM on interface VLAN-interface
system-view
lticast routing
ace vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim dm
[Sysname-Vlan-interface100] ipv6 pim bfd enable
rs
vpn-instance vpn-instance-name: Specifi
of 1 to 31 characters. If yo
# Enable IPv6 multicast routing on the public network and enter public network IPv6 PIM view.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] ipv6 pim
[Sysname-pim6]
<Sysname> system-view
[Sysname] ipv6 multicast
[Sysname-mrib6-mvpn] quit
[Sysname] ipv6 pim vpn-instance mvpn
[Sysname-pim6-mvpn]
Use ipv6 pim bfd enable to ena
undo ipv6 pim b
Default
BFD is disa
Views
bled f
In
Predefined
network-admin
idelines
This command takes effect only when IP
# On the public network, enable IPv6 multicast ro
100, and enable BFD for IPv6 PIM on the interface.
<Sysname>
[Sysname] ipv6 mu
[Sysname-mrib6] quit
[Sysname] interf
325