PIM snooping commands
display pim-snooping neighbor
Use display pim-snooping neighbor to display PIM snooping neighbor information.
Syntax
display pim-snooping neighbor [ vlan vlan-id ] [ slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN in the range of 1 to 4094. If you do not specify a VLAN, the command
displays PIM snooping neighbor information for all VLANs.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays PIM snooping neighbor information on the master
device.
verbose: Displays detailed information. If you do not specify this keyword, the command displays brief
information.
Examples
# Display detailed PIM snooping neighbor information for VLAN 2.
<Sysname> display pim-snooping neighbor vlan 2 verbose
Total 2 neighbors.
VLAN 2: Total 2 neighbors.
10.1.1.2
Slots (0 in total):
Ports (1 in total):
XGE1/0/1 (02:02:23) LAN Prune Delay(T)
10.1.1.3
Slots (0 in total):
Ports (1 in total):
XGE1/0/2 (00:32:43)
Table 11 Command output
Field Descri
tion
Total 2 neighbors Total number of PIM snooping neighbors.
VLAN 2: Total 2 neighbors Total number of PIM snooping neighbors in VLAN 2.
46
To Next Page
Loading...
Need help?
General
