To Next Page

To Previous Page

Predefined user roles

network-admin

Parameters

version-number: Specifies an IGMP snooping version, 2 or 3.

vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its

ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The value range for the VLAN ID is 1

to 4094.

Usage guidelines

You must enable IGMP snooping for the specified VLANs before you execute this command.

This command and the igmp-snooping version command have the same function but different effective

ranges:

• The version command in IGMP-snooping view takes effect on the specified VLANs.

• The igmp-snooping version command takes effect on the current VLAN.

For a VLAN, the igmp-snooping version command and the version command in IGMP-snooping view

have the same priority, and the most recent configuration takes effect.

Examples

# Enable IGMP snooping for VLAN 2 through VLAN 10, and specify IGMP snooping version 3 for these

VLANs.

<Sysname> system-view

[Sysname] igmp-snooping

[Sysname-igmp-snooping] enable vlan 2 to 10

[Sysname-igmp-snooping] version 3 vlan 2 to 10

Related commands

• enable (IGMP-snooping view)

• igmp-snooping enable

Other manuals for HP 5900 series

Questions and Answers:

Need help?

Do you have a question about the HP 5900 series and is the answer not in the manual?

General