HP 5900 series Command Reference

<Sysname> system-view
[Sysname] mld-snooping
t1p-priority 3
Related c
enabl
ble MLD snooping for VLANs.
Syntax
enable vlan vlan-list
MLD snooping is disabled in a VLAN.
MLD-snooping view
network-admin
Paramete
st: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its
nge of VLANs in the form of start-vlan-id to end-vlan-id. The value range for the VLAN ID is 1
Usage guidelines
ferent effective
AN.
r a VLAN, the mld-snooping enable command and the enable command in MLD-snooping view have
Examples
bally, and enable MLD snooping for VLAN 2 through VLAN 10.
mld-snooping
ping] enable vlan 2 to 10
Related c
• mld-snooping
• mld-snooping enable
[Sysname-mld-snooping] do
ommands
mld-snooping dot1p-priority
e (MLD-snooping view)
Use enable to enable MLD snooping for VLANs.
Use undo enable to disa
undo enable vlan vlan-list
Default
Views
Predefined user roles
rs
vlan vlan-li
ID or a ra
to 4094.
You must globally enable MLD snooping before you execute this command.
This command and the mld-snooping enable command have the same function but dif
ranges:
• The enable command in MLD-snooping view takes effect on the specified VLANs.
• The mld-snooping enable command takes effect on the current VL
Fo
the same priority, and the most recent configuration takes effect.
# Enable MLD snooping glo
<Sysname> system-view
[Sysname]
[Sysname-mld-snoo
ommands
206

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)