HP 5900 series - Ipv6 Pim Sm; Ipv6 Pim State-Refresh-Capable

Views
Interface view
Predefine
Examples
N-interface 100 to drop hello messages without the generation ID options.
<Sysname> system-view
00
ire-genid
pim sm
enable IPv6 PIM-SM.
Use undo ipv6 pim sm to disable IPv6 PIM-SM.
Syntax
ipv6 pim sm
sm
isabled.
Predefine
twork-admin
Usage gu
nly when IPv6 multicast routing is enabled. If the interface belongs to a VPN
g is enabled on the VPN instance.
Examples
t routing, and enable IPv6 PIM-SM on VLAN-interface
system-view
cast routing
[Sysname-mrib6] quit
Related c
pim state-refresh-capable
enable the state refresh feature on an interface.
Use undo ipv6 pim state-refresh-capable to disable the state refresh feature.
d user roles
network-admin
# Enable VLA
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface100] ipv6 pim requ
ipv6
Use ipv6 pim sm to
undo ipv6 pim
Default
IPv6 PIM-SM is d
Views
Interface view
d user roles
ne
idelines
This command takes effect o
instance, make sure IPv6 multicast routin
# On the public network, enable IPv6 multicas
100.
<Sysname>
[Sysname] ipv6 multi
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 pim sm
ommands
ipv6 multicast routing
ipv6
Use ipv6 pim state-refresh-capable to
333