HP 5900 series Command Reference

entry-limit (MLD-snooping view)
Use entry-limit to set the global maximum number of MLD snooping forwarding entries, including
dynamic entries and static entries.
Use undo entry-limit to restore the default.
Syntax
entry-limit limit
undo entry-limit
Default
The default setting is 4294967295.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
limit: Sets the global maximum number of MLD snooping forwarding entries, in the range of 0 to
4294967295.
Examples
# Set the global maximum number of MLD snooping forwarding entries to 512.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] entry-limit 512
fast-leave (MLD-snooping view)
Use fast-leave to enable fast-leave processing globally.
Use undo fast-leave to disable fast-leave processing globally.
Syntax
fast-leave [ vlan vlan-list ]
undo fast-leave [ vlan vlan-list ]
Default
Fast-leave processing is disabled.
Views
MLD-snooping view
Predefined user roles
network-admin
207

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)