HP 5900 series - Mld Last-Listener-Query-Interval

Parameters
count: Sets an MLD last listener query count in the range of 1 to 255.
Usage guidelines
This command and the last-listener-query-count command in MLD view have the same function but
different effective ranges:
• The last-listener-query-count command in MLD view takes effect on all interfaces.
• The mld last-listener-query-count command takes effect on the current interface.
For an interface, the mld last-listener-query-count command takes priority over the
last-listener-query-count command in MLD view.
Examples
# Set the MLD last listener query count to 6 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld last-listener-query-count 6
Related commands
last-listener-query-count (MLD view)
mld last-listener-query-interval
Use mld last-listener-query-interval to set the MLD last listener query interval on an interface.
Use undo mld last-listener-query-interval to restore the default.
Syntax
mld last-listener-query-interval interval
undo mld last-listener-query-interval
Default
The MLD last listener query interval is 1 second.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets an MLD last listener query interval in the range of 1 to 25 seconds.
Usage guidelines
This command and the last-listener-query-interval command in MLD view have the same function but
different effective ranges:
• The last-listener-query-interval command in MLD view takes effect on all interfaces.
• The mld last-listener-query-interval command takes effect on the current interface.
For an interface, the mld last-listener-query-interval command takes priority over the
last-listener-query-interval command in MLD view.
285