HP 5900 series - Startup-Query-Count (MLD View); Startup-Query-Interval (MLD View)

Related commands
display mld ssm-mapping
startup-query-count (MLD view)
Use startup-query-count to set the global MLD startup query count.
Use undo startup-query-count to restore the default.
Syntax
startup-query-count count
undo startup-query-count
Default
The global MLD startup query count equals the MLD querier's robustness variable.
Views
MLD view
Predefined user roles
network-admin
Parameters
count: Sets an MLD startup query count in the range of 1 to 255.
Usage guidelines
This command and the mld startup-query-count command have the same function but different effective
ranges:
• The startup-query-count command in MLD view takes effect on all interfaces.
• The mld startup-query-count command takes effect on the current interface.
For an interface, the mld startup-query-count command takes priority over the startup-query-count
command in MLD view.
Examples
# Set the global MLD startup query count to 5 on the public network.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] startup-query-count 5
Related commands
mld startup-query-count
startup-query-interval (MLD view)
Use startup-query-interval to set the global MLD startup query interval.
Use undo startup-query-interval to restore the default.
Syntax
startup-query-interval interval
297