HP 5900 series Command Reference

298
undo startup-query-interval
Default
The global MLD startup query interval equals one quarter of the MLD general query interval.
Views
MLD view
Predefined user roles
network-admin
Parameters
interval: Sets an MLD startup query interval in the range of 1 to 31744 seconds.
Usage guidelines
This command and the mld startup-query-interval command have the same function but different
effective ranges:
• The startup-query-interval command in MLD view takes effect on all interfaces.
• The mld startup-query-interval command takes effect on the current interface.
For an interface, the mld startup-query-interval command takes priority over the startup-query-interval
command in MLD view.
Examples
# Set the global MLD startup query interval to 100 seconds on the public network.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] startup-query-interval 100
Related commands
mld startup-query-interval

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)