as-number: Specifies an AS number in the range of 1 to 4294967295. If you do not specify an AS
Usage gu
u must execute the cache-sa-enable command before you execute this command. Otherwise, this
Examples
in the SA cache on the public network.
sdp sa-cache
4 10.10.10.10 BGP 100 00:00:11 00:05:49
10.10.1.2 225.0.0.5 10.10.10.10 BGP 100 00:00:11 00:05:49
Table 50 Command output
number, the command displays (S, G) entries for all ASs.
idelines
Yo
command does not give any output.
# Display information about the (S, G) entries
<Sysname> display m
Total Source-Active Cache - 5 entries
Matched 5 entries
Source Group Origin RP Pro AS Uptime Expires
10.10.1.2 225.0.0.1 10.10.10.10 BGP 100 00:00:11 00:05:49
10.10.1.2 225.0.0.2 10.10.10.10 BGP 100 00:00:11 00:05:49
10.10.1.2 225.0.0.3 10.10.10.10 BGP 100 00:00:11 00:05:49
10.10.1.2 225.0.0.
Field Descri
tion
Total Source-Active Cache ources in the SA cache. Total number of multicast s
Matched ries that match a multicast source. Total number of (S, G) ent
Source Multicast source address.
Group Multicast group address.
Origin RP Address of the RP that generated the (S, G) entry.
Pro
Type of protocol from which the AS number of the origin RP
originates. If the system could not obtain the AS number, this field
displays a question mark (?).
AS
AS number of the origin RP. If the system could not obtain the AS
number, this field displays a question mark (?).
Uptime Length of time for which the cached (S, G) entry has existed.
Expires Length of time in which the cached (S, G) entry will expire.
Related commands
displa
A cache.
p [ vpn-instance vpn-instance-name ] sa-count [ as-number ]
Views
Any view
cache-sa-enable
y msdp sa-count
Use display msdp sa-count to display the number of (S, G) entries in the S
Syntax
display msd
169
To Next Page
Loading...
Need help?
General
