HP 5900 series - Display Msdp Sa-Cache

Field Descri
p
tion
Output queue size output queue. Data size cached in the
Counters for MSDP message
ause of
t SA
-in-progress messages.
sent
• Incoming/outgoing data packet—Number of received and sent SA
messages encapsulated with multicast data.
MSDP peer statistics:
• RPF check failure—Number of SA messages discarded bec
RPF check failure.
• Incoming/outgoing SA—Number of received and sent SA
messages.
• Incoming/outgoing SA-Request—Number of received and sent SA
requests.
• Incoming/outgoing SA-Response—Number of received and sen
responses.
• Incoming/outgoing Keepalive—Number of received and sent
keepalive messages.
• Incoming/outgoing Notification—Number of received and sent
notification messages.
• Incoming/outgoing Traceroutes in progress—Number of received
and sent traceroute
• Incoming/outgoing Traceroute reply—Number of received and
traceroute replies.
• Incoming/outgoing Unknown—Number of received and sent
unknown messages.
displa
Use display msdp sa-cache to display (S, G) entries in the SA cache.
Syntax
display msdp [ vpn-instance vpn-instance-name ] sa-cache [ group-address | source-address |
as-number ] *
Views
Predefine
ork-operator
Paramete
pecifies an MPLS L3VPN instance by its name, a case-sensitive string
y msdp sa-cache
Any view
d user roles
network-admin
netw
rs
vpn-instance vpn-instance-name: S
of 1 to 31 characters. If you do not specify a VPN instance, the command displays (S, G) entries in the
SA cache on the public network.
group-address: Specifies a multicast group address in the range of 224.0.1.0 to 239.255.255.255. If you
do not specify a multicast group, the command displays (S, G) entries for all multicast groups.
source-address: Specifies a multicast source address. If you do not specify a multicast source, the
command displays (S, G) entries for all sources.
168