HP 5900 series Command Reference

Field Descri
p
tion
(00:01:30)
Remaining aging time for the dynamic router port.
• For a global port, this field is always displayed.
• For a non-global port, this field is displayed if the port is on the master device.
Otherwise, you must specify the slot slot-number option to display this field.
Related commands
reset mld-snooping router-port
display mld-snooping static-group
Use display mld-snooping static-group to display static MLD snooping forwarding entries.
Syntax
display mld-snooping static-group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ]
[ verbose ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value range for this
argument is FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y"
represent any hexadecimal numbers from 0 to F. If you do not specify an IPv6 multicast group, the
command displays static MLD snooping forwarding entries for all IPv6 multicast groups.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If you do not specify an IPv6
multicast source, the command displays static MLD snooping forwarding entries for all IPv6 multicast
sources.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN,
the command displays static MLD snooping forwarding entries for all VLANs.
verbose: Displays detailed information. If you do not specify this keyword, the command displays brief
information.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays static MLD snooping forwarding entries on the
master device.
Examples
# Display detailed information about the static MLD snooping forwarding entries for VLAN 2.
<Sysname> display mld-snooping static-group vlan 2 verbose
Total 1 entries.
VLAN 2: Total 1 entries.
(::,FF1E::101)
Attribute: local port
202

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)