verbose: Displays detailed information. If you do not specify this keyword, the command displays brief
information.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays static IGMP snooping forwarding entries on the
master device.
Examples
# Display detailed information about the static IGMP snooping forwarding entries for VLAN 2.
<Sysname> display igmp-snooping static-group vlan 2 verbose
Total 1 entries.
VLAN 2: Total 1 entries.
(0.0.0.0, 224.1.1.1)
Attribute: local port
FSM information: normal
Host slots (0 in total):
Host ports (1 in total):
XGE1/0/2
Table 4 Command output
Field Descri
tion
Total 1 entries Total number of static IGMP snooping forwarding entries.
VLAN 2: Total 1 entries Total number of static IGMP snooping forwarding entries in VLAN 2.
(0.0.0.0, 224.1.1.1) (S, G) entry, where 0.0.0.0 in the S position means any multicast sources.
Attribute
Entry attribute:
• global port—The entry has a global port.
• local port—The entry has a port that resides on the specified device.
• slot—The entry has a port that resides on a device other than the specified
device.
FSM information
Finite state machine information of the entry:
• delete—The entry attributes have been deleted.
• dummy—The entry is a new temporary entry.
• no info—No entry exists.
• normal—The entry is a correct entry.
Host slots (0 in total)
Member IDs of the member devices that have member ports and the total number
of the member devices (excluding the specified member device).
Host ports (1 in total) Member ports, and the total number of the member ports.
display igmp-snooping static-router-port
Use display igmp-snooping static-router-port to display static router port information.
Syntax
display igmp-snooping static-router-port [ vlan vlan-id ] [ slot slot-number ]
6
To Next Page
Loading...
Need help?
General
