HP 5900 series Command Reference

Usage guidelines
n IPv6 PIM view or for the current interface in
ration made in interface view takes priority over the configuration made in
Examples
-view
n-interface 100
ace100] ipv6 pim hello-option neighbor-tracking
VLAN-interface 100 when neighbor tracking is
im6] hello-option neighbor-tracking
[Sysname] interface vlan-interface 100
eighbor-tracking disable
pim hello-option override-interval
t the override interval on an interface.
val to restore the default.
rval
undo ipv6 pim hello-option override-interval
Default
val is 2500 milliseconds.
Views
rface view
Predefine
Paramete
l: Sets an override interval in the range of 1 to 65535 milliseconds.
elines
current interface in interface
de in interface view takes priority over the configuration made in IPv6 PIM
Examples
# Set the override interval to 2000 milliseconds on VLAN-interface 100.
You can enable neighbor tracking for all interfaces i
interface view. The configu
IPv6 PIM view.
# Enable neighbor tracking on VLAN-interface 100.
<Sysname> system
[Sysname] interface vla
[Sysname-Vlan-interf
# On the public network, disable neighbor tracking on
enabled globally.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-p
[Sysname-pim6] quit
[Sysname-Vlan-interface100] ipv6 pim hello-option n
Related commands
hello-option neighbor-tracking (IPv6 PIM view)
ipv6
Use ipv6 pim hello-option override-interval to se
Use undo ipv6 pim hello-option override-inter
Syntax
ipv6 pim hello-option override-interval inte
The override inter
Inte
d user roles
network-admin
rs
interva
Usage guid
You can set the override interval for all interfaces in IPv6 PIM view or for the
view. The configuration ma
view.
330

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)