<Sysname> system-view
[Sysname] ipv6 multicast-vlan entry-limit 256
Related commands
entry-limit (MLD-snooping view)
ipv6 port multicast-vlan
Use ipv6 port multicast-vlan to assign a port to an IPv6 multicast VLAN.
Use undo ipv6 port multicast-vlan to restore the default.
Syntax
ipv6 port multicast-vlan vlan-id
undo ipv6 port multicast-vlan
Default
A port does not belong to IPv6 multicast VLANs.
Views
Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
vlan-id: Specifies a multicast VLAN by its ID in the range of 1 to 4094.
Usage guidelines
A port can belong to only one IPv6 multicast VLAN.
Examples
# Assign Ten-GigabitEthernet 1/0/1 to IPv6 multicast VLAN 100.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] ipv6 port multicast-vlan 100
port (IPv6 multicast VLAN view)
Use port to assign user ports to an IPv6 multicast VLAN.
Use undo port to remove user ports from the IPv6 multicast VLAN.
Syntax
port interface-list
undo port { all | interface-list }
Default
An IPv6 multicast VLAN does not have user ports.
Views
IPv6 multicast VLAN view
252
To Next Page
Loading...
Need help?
General
