Parameters
mac-address: Specifies an IPv6 MAC multicast group by its IPv6 MAC address. If you do not specify an
IPv6 MAC multicast group, the command displays IPv6 MAC multicast group entries for all IPv6 MAC
multicast groups.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN,
the command displays IPv6 MAC multicast group entries for all VLANs.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays IPv6 MAC multicast group entries on the master
device.
Examples
# Display IPv6 MAC multicast group entries for VLAN 2.
<Sysname> display ipv6 l2-multicast mac forwarding vlan 2
Total 1 MAC entries.
VLAN 2: Total 1 MAC entries.
MAC group address: 3333-0000-0101
Host slots (0 in total):
Host ports (3 in total):
XGE1/0/1
XGE1/0/2
XGE1/0/3
Table 58 Command output
Field Descri
tion
Total 1 MAC entries Total number of IPv6 MAC multicast group entries.
VLAN 2: Total 1 MAC entries Total number of IPv6 MAC multicast group entries in VLAN 2.
MAC group address Address of the IPv6 MAC multicast group.
Host slots (0 in total)
Member IDs of the member devices that have member ports and the total
number of the member devices (excluding the specified member device).
Host ports (3 in total) Member ports, and the total number of the member ports.
display mld-snooping
Use display mld-snooping to display MLD snooping status.
Syntax
display mld-snooping [ global | vlan vlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
197