HP 5900 series Command Reference

Priority: 64
Hash mask length: 126
Uptime: 02:53:32
Candidate BSR address: 17:12::1
Priority: 64
Hash mask length: 126
Scope: 8
State: Pending
Bootstrap timer: 00:00:07
Candidate BSR address: 17:13::1
Priority: 64
Hash mask length: 126
Table 87 Command output
Field Descri
p
tion
Scope-zone expiry timer Scoped zone aging timer.
Elected BSR address Address of the elected BSR.
Candidate BSR address Address of the C-BSR.
Priority BSR priority.
Uptime Length of time the BSR has been up.
display ipv6 pim claimed-route
Use display ipv6 pim claimed-route to display information about all routes that IPv6 PIM uses.
Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] claimed-route [ipv6-source-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays information about all
routes that IPv6 PIM uses on the public network.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If you do not specify an IPv6
multicast source, the command displays information about all routes that IPv6 PIM uses.
Examples
# Display information about all routes that IPv6 PIM uses on the public network.
<Sysname> display ipv6 pim claimed-route
RPF-route selecting rule: longest-match
306

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)