max-response-time (IGMP view)
Use max-response-time to set the global maximum response time for IGMP general queries.
Use undo max-response-time to restore the default.
Syntax
max-response-time time
undo max-response-time
Default
The global maximum response time for IGMP general queries is 10 seconds.
Views
IGMP view
Predefined user roles
network-admin
Parameters
time: Sets the maximum response time for IGMP general queries in the range of 1 to 3174 seconds.
Usage guidelines
This command and the igmp max-response-time command have the same function but different effective
ranges:
• The max-response-time command in IGMP view takes effect on all interfaces.
• The igmp max-response-time command takes effect on the current interface.
For an interface, the igmp max-response-time command takes priority over the max-response-time
command in IGMP view.
Examples
#Set the global maximum response time for IGMP general queries to 25 seconds on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] max-response-time 25
Related commands
igmp max-response-time
other-querier-present-interval (IGMP view)
Use other-querier-present-interval to set the global IGMP other querier present timer.
Use undo other-querier-present-interval to restore the default.
Syntax
other-querier-present-interval interval
undo other-querier-present-interval
Default
The IGMP other querier present timer is calculated by the following formula:
105