HP 5900 series Command Reference

[Sysname-Vlan-interface100] ipv6 multicast boundary ff03:: 16
# Configure VLAN-interface 100 to be the forwarding boundary of the IPv6 multicast groups in the
lan-interface100] ipv6 multicast boundary scope 4
Related c
ipv6 multicast forwarding supervlan community
supervlan community to configure IPv6 multicast forwarding among
Use undo ipv6 multicast forwarding supervlan community to restore the default.
Syntax
undo ipv6 multicast forwarding supervlan community
Default
Multicast data cannot be forwarded among sub-VLANs of the super VLAN.
Views
e view
Predefine
min
Usage gu
is
he required multicast forwarding entries, use the reset ipv6
ulticast forwarding-table command.
Examples
ding among sub-VLANs of the super VLAN 2.
lan-interface2] ipv6 multicast forwarding supervlan community
Related c
-table
ipv6 multicast routing
er IPv6 MRIB view.
Use undo ipv6 multicast routing to disable IPv6 multicast routing.
admin-local scope.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-V
ommands
display ipv6 multicast boundary
Use ipv6 multicast forwarding
sub-VLANs of a super VLAN.
ipv6 multicast forwarding supervlan community
VLAN interfac
d user roles
network-ad
idelines
After you execute the ipv6 multicast forwarding supervlan community command, you must clear all IPv6
multicast forwarding entries with the super VLAN interface as the incoming interface. Otherwise, th
command cannot take effect. To clear t
m
# Configure multicast forwar
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-V
ommands
reset ipv6 multicast forwarding
Use ipv6 multicast routing to enable IPv6 multicast routing and ent
268

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)