HP 5900 series Command Reference

MSDP commands
cache-sa-enable
Use cache-sa-enable to enable the SA message cache mechanism to cache the (S, G) entries contained
in SA messages.
Use undo cache-sa-enable to disable the SA message cache mechanism.
Syntax
cache-sa-enable
undo cache-sa-enable
Default
The SA message cache mechanism is enabled. The device caches the (S, G) entries contained in
received SA messages.
Views
MSDP view
Predefined user roles
network-admin
Examples
# Enable the SA message cache mechanism on the public network, so that the device caches the (S, G)
entries contained in the received SA messages.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] cache-sa-enable
Related commands
• display msdp sa-cache
• display msdp sa-count
display msdp brief
Use display msdp brief to display brief information about MSDP peers.
Syntax
display msdp [ vpn-instance vpn-instance-name ] brief [ state { connect | disabled | established | listen
| shutdown } ]
Views
Any view
Predefined user roles
network-admin
163

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)