HP 5900 series Command Reference

3:3::4 pim-sm No
3:3::5 2002 pim-sm Yes
Table 95 Command output
Field Descri
p
tion
Group/MaskLen IPv6 multicast group to which the RP is designated.
[B]
The RP provides services for IPv6 multicast groups in the BIDIR-PIM domain. If this
field is not displayed, the RP provides services for groups in the IPv6 PIM-SM
domain.
RP address
RP. If the RP resides on the device where the command is
s field displays (local) after the address.
IPv6 address of the
executed, thi
Priority Priority of the RP.
HoldTime RP lifetime.
Uptime Length of time the RP has been up.
Expires Remaining lifetime for the RP.
Preferred Whether the static RP is preferred.
Configured ACL/ACL ACL defining the IPv6 multicast groups to which the static RP is designated.
Mode RP service mode: IPv6 PIM-SM or IPv6 BIDIR-PIM.
RP mapping for this group IPv6 address of the RP that provides services for the IPv6 multicast group.
displa
tics to display statistics for IPv6 PIM packets.
im statistics
Predefine
twork-admin
Examples
ckets.
led
y ipv6 pim statistics
Use display ipv6 pim statis
Syntax
display ipv6 p
Views
Any view
d user roles
ne
network-operator
# Display statistics for IPv6 PIM pa
<Sysname> display ipv6 pim statistics
Received PIM packets: 3295
Sent PIM packets : 5975
Valid Invalid Succeeded Fai
Hello : 3128 0 4333 0
Reg : 14 0 0 0
Reg-stop : 0 0 0 0
JP : 151 0 561 0
BSM : 0 0 1081 0
318

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)