HP 5900 series - Mld Query-Interval

• The other-querier-present-timer command takes effect on all interfaces.
• The mld other-querier-present-timeout command takes effect on the current interface.
For an interface, the mld other-querier-present-timeout command takes priority over the
other-querier-present-timer command.
Examples
# Set the MLD other querier present timer to 125 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld other-querier-present-timeout 125
Related commands
other-querier-present-timeout (MLD view)
mld query-interval
Use mld query-interval to set the MLD general query interval on an interface.
Use undo mld query-interval to restore the default.
Syntax
mld query-interval interval
undo mld query-interval
Default
The MLD general query interval is 125 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets an MLD general interval in the range of 1 to 31744 seconds.
Usage guidelines
This command and the query-interval command in MLD view have the same function but different
effective ranges:
• The query-interval command in MLD view takes effect on all interfaces.
• The mld query-interval command takes effect on the current interface.
For an interface, the mld query-interval command takes priority over the query-interval command in
MLD view.
Examples
# Set the MLD general query interval to 60 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld query-interval 60
288