1001::1
Expires: 00:59:19, FSM: J
1001::2
Expires: 00:59:20, FSM: J
XGE1/0/3
Expires: 00:02:21, FSM: PP
Table 67 Command output
Field Descri
tion
Total 1 entries Total number of (S, G) entries and (*, G) entries.
FSM Flag: NI-no info, J-join,
PP-prune pending
State machine flag of the downstream port:
• NI—Initial state.
• J—Join.
• PP—Prune pending.
(2000::1, FF1E::1) (S, G) entry.
FSM information
Finite state machine information of the entry:
• delete—The entry attributes have been deleted.
• dummy—The entry is a new temporary entry.
• no info—No entry exists.
• normal—The entry is a correct entry.
Upstream neighbor Upstream neighbor of the (S, G) or (*, G) entry.
Upstream Ports (1 in total)
Upstream ports, and the total number of the ports.
This field is displayed if the port is on the master device. Otherwise, you
must specify the slot slot-number option to display this field.
Downstream Ports (2 in total)
Downstream port of the upstream neighbor, and the total number of the
downstream ports.
Downstream Neighbors (2 in
total)
Downstream neighbors of the downstream port, and the total number of the
downstream neighbors.
Expires: 00:03:01, FSM: J
Remaining aging time for the downstream port or downstream neighbor,
and the finite state machine information.
• For a global port, this field is always displayed.
• For a non-global port, this field is displayed if the port is on the master
device. Otherwise, you must specify the slot slot-number option to
display this field.
display ipv6 pim-snooping statistics
Use display ipv6 pim-snooping statistics to display statistics for the IPv6 PIM messages learned through
IPv6 PIM snooping.
Syntax
display ipv6 pim-snooping statistics
Views
Any view
241
To Next Page
Loading...
Need help?
General
