HP 5900 series Command Reference

Syntax
igmp version version-number
undo igmp version
Default
The default IGMP version is 2.
Views
Interface view
Predefined user roles
network-admin
Parameters
version-number: Specifies an IGMP version in the range of 1 to 3.
Examples
# Specify IGMP version 1 for VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp version 1
last-member-query-count (IGMP view)
Use last-member-query-count to set the global IGMP last member query count.
Use undo last-member-query-count to restore the default.
Syntax
last-member-query-count count
undo last-member-query-count
Default
The global IGMP last member query count equals the IGMP querier's robustness variable.
Views
IGMP view
Predefined user roles
network-admin
Parameters
count: Sets an IGMP last member query count in the range of 1 to 255.
Usage guidelines
This command and the igmp last-member-query-count command have the same function but different
effective ranges:
• The last-member-query-count command in IGMP view takes effect on all interfaces.
• The igmp last-member-query-count command takes effect on the current interface.
For an interface, the igmp last-member-query-count command takes priority over the
last-member-query-count command in IGMP view.
103

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)