HP 5900 series Command Reference

Examples
# Set the global IGMP last member query count to 6 on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] last-member-query-count 6
Related commands
igmp last-member-query-count
last-member-query-interval (IGMP view)
Use last-member-query-interval to set the global IGMP last member query interval.
Use undo last-member-query-interval to restore the default.
Syntax
last-member-query-interval interval
undo last-member-query-interval
Default
The global IGMP last member query interval is 1 second.
Views
IGMP view
Predefined user roles
network-admin
Parameters
interval: Sets an IGMP last member query interval in the range of 1 to 25 seconds.
Usage guidelines
This command and the igmp last-member-query-interval command have the same function but different
effective ranges:
• The last-member-query-interval command in IGMP view takes effect on all interfaces.
• The igmp last-member-query-interval command takes effect on the current interface.
For an interface, the igmp last-member-query-interval command takes priority over the
last-member-query-interval command in IGMP view.
Examples
# Set the global IGMP last member query interval to 6 seconds on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] last-member-query-interval 6
Related commands
igmp last-member-query-interval
104

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)