Reference count of 226.1.1.1: 3
(192.6.1.2, 225.1.1.1) switch time: 00:00:21
(192.6.1.2, 225.1.2.50) switch time: 00:00:05
(192.6.1.5, 239.1.1.159) switch time: 00:00:21
# Display the data-group reuse information sent by VPN instance mvpn within 30 seconds in the MD.
<Sysname> display multicast-domain vpn-instance mvpn data-group send reuse 30
MD data-group information sent by VPN instance: mvpn
Total 2 data-groups for 3 entries
Total 2 data-groups and 3 entries matched
Reuse count of 226.1.1.0: 1
Reuse count of 226.1.1.1: 1
Reuse count of 226.1.1.2: 1
Table 53 Command output
Field Descri
tion
MD data-group information sent by VPN
instance: mvpn
Data-group information sent by VPN instance mvpn.
Total 2 data-groups for 6 entries A total of two data-groups, associated with six (S, G) entries.
Total 2 data-groups and 6 entries matched
A total of two data-groups are matched, associated with six
(S, G) entries.
Reference count of 226.1.1.0
Number of VPN multicast groups referenced by the sent
data-group.
switch time
Switchover time of the VPN (S, G) entry referenced by the
data-group.
Reuse count of 226.1.1.0
Number of data-group reuses during the specified length of
time.
display multicast-domain default-group
Use display multicast-domain default-group to display the default-group information.
Syntax
display multicast-domain [ vpn-instance vpn-instance-name ] default-group
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify a VPN instance, the command displays the default-group
information for all VPN instances.
190
To Next Page
Loading...
Need help?
General
