HP 5900 series - Igmp-Snooping Querier

Syntax
igmp-snooping overflow-replace [ vlan vlan-list ]
undo igmp-snooping overflow-replace [ vlan vlan-list ]
Default
roup replacement feature is disabled on a port.
Views
r 2 Ethernet interface view, Layer 2 aggregate interface view
Predefine
ies a VLAN by its
he VLAN ID is 1
Usage gu
ame function but
d in IGMP-snooping view takes effect on all ports.
The igmp-snooping overflow-replace command takes effect on the current port.
-replace
g view.
Examples
multicast group replacement feature for VLAN 2 on Ten-GigabitEthernet 1/0/1.
1/0/1] igmp-snooping overflow-replace vlan 2
igmp-
rier to enable the IGMP snooping querier.
rier to disable the IGMP snooping querier.
undo igmp-snooping querier
Default
oping querier is disabled.
The multicast g
Laye
d user roles
network-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specif
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The value range for t
to 4094. If you do not specify a VLAN, the command takes effect on all VLANs.
idelines
This command takes effect only on the multicast groups that a port joins dynamically.
This command and the overflow-replace command in IGMP-snooping view have the s
different effective ranges:
• The overflow-replace comman
•
For a port, the igmp-snooping overflow-replace command takes priority over the overflow
command in IGMP-snoopin
# Enable the
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet
Related commands
overflow-replace (IGMP-snooping view)
snooping querier
Use igmp-snooping que
Use undo igmp-snooping que
Syntax
igmp-snooping querier
The IGMP sno
30