display l2-multicast ip forwarding
Use display l2-multicast ip forwarding to display Layer 2 IP multicast group entries.
Syntax
ip forwarding [ group group-address | source source-address ] * [ vlan vlan-id ]
[ slot slot-number ]
Views
Predefine
ork-operator
Paramete
cify a multicast group,
y a multicast
f you do not specify a VLAN,
ot specify this option, the command displays Layer 2 IP multicast group entries on the master
vice.
Examples
l2-multicast ip forwarding vlan 2
tal 1 entries.
es.
3 in total):
T Command output
display l2-multicast
Any view
d user roles
network-admin
netw
rs
group group-address: Specifies a multicast group by its IP address. If you do not spe
the command displays Layer 2 IP multicast group entries for all multicast groups.
source source-address: Specifies a multicast source by its IP address. If you do not specif
source, the command displays Layer 2 IP multicast group entries for all multicast sources.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. I
the command displays Layer 2 IP multicast group entries for all VLANs.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do n
de
# Display Layer 2 IP multicast group entries for VLAN 2.
<Sysname> display
To
VLAN 2: Total 1 IP entri
(0.0.0.0, 224.1.1.1)
Host slots (0 in total):
Host ports (
XGE1/0/1
XGE1/0/2
XGE1/0/3
able 8
Field Descri
tion
Total 1 entries Total number of Layer 2 IP multicast group entries.
VLAN 2: Total 1 IP entries Total number of Layer 2 IP multicast group entries in VLAN 2.
(0.0.0.0, 224.1.1.1) (S, G) entry, where 0.0.0.0 in the S position means any multicast sources.
Host slots (0 in total)
Member IDs of the member devices that have member ports and the total
number of the member devices (excluding the specified member device).
10
To Next Page
Loading...
Need help?
General
