undo source-deny port interface-list
Default
Multicast source port filtering is disabled, and the ports can connect to both multicast sources and
multicast receivers.
Views
IGMP-snooping view
Predefined user roles
network-admin
Parameters
port interface-list: Specifies a port list. Specifies a space-separated list of port items. Each item specifies
a port by its port type and number or a range of ports in the form of start-interface-type interface-number
to end-interface-type interface-number.
Usage guidelines
This command and the igmp-snooping source-deny command have the same function but different
effective ranges:
• The source-deny command in IGMP-snooping view takes effect on the specified ports.
• The igmp-snooping source-deny command takes effect on the current port.
For a port, the igmp-snooping source-deny command and the source-deny command in IGMP-snooping
view have the same priority, and the most recent configuration takes effect.
Examples
# Enable multicast source port filtering on ports Ten-GigabitEthernet 1/0/1 through Ten-GigabitEthernet
1/0/4.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] source-deny port ten-gigabitethernet 1/0/1 to
ten-gigabitethernet 1/0/4
Related commands
igmp-snooping source-deny
version (IGMP-snooping view)
Use version to specify an IGMP snooping version for VLANs.
Use undo version to restore the default.
Syntax
version version-number vlan vlan-list
undo version vlan vlan-list
Default
The default setting in a VLAN is 2.
Views
IGMP-snooping view
44
To Next Page
Loading...
