HP 5900 series Command Reference

Syntax
igmp-snooping max-response-time interval
undo igmp-snooping max-response-time
Default
0 seconds.
Views
N view
Predefine
min
Paramete
Usage gu
be greater
function but
view takes effect on all VLANs.
The igmp-snooping max-response-time command takes effect on the current VLAN.
e-time command in IGMP-snooping view.
Examples
g, and set the maximum response time for IGMP general queries to
gmp-snooping] quit
ping max-response-time 5
Related c
igmp-
e multicast group replacement feature on a port.
multicast group replacement feature on a port.
The default setting is 1
VLA
d user roles
network-ad
rs
interval: Sets the maximum response time for IGMP general queries, in the range of 1 to 3174 seconds.
idelines
You must enable IGMP snooping for a VLAN before you execute this command for the VLAN.
To avoid mistakenly deleting multicast group members, set IGMP general query interval to
than the maximum response time for IGMP general queries.
This command and the max-response-time command in IGMP-snooping view have the same
different effective ranges:
• The max-response-time command in IGMP-snooping
•
For a VLAN, the igmp-snooping max-response-time command takes priority over the
max-respons
# In VLAN 2, enable IGMP snoopin
5 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-i
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snoo
ommands
• enable (IGMP-snooping view)
• igmp-snooping enable
• max-response-time (IGMP-snooping view)
snooping overflow-replace
Use igmp-snooping overflow-replace to enable th
Use undo igmp-snooping overflow-replace to disable the
29

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)