Table 2 Command output
Field Descri
tion
Total 1 entries Total number of dynamic IGMP snooping forwarding entries.
VLAN 2: Total 1 entries Total number of dynamic IGMP snooping forwarding entries in VLAN 2.
(0.0.0.0, 224.1.1.1) (S, G) entry, where 0.0.0.0 in the S position means any multicast sources.
Attribute
Entry attribute:
• global port—The entry has a global port.
• local port—The entry has a port that resides on the specified device.
• slot—The entry has a port that resides on a device other than the specified
device.
FSM information
Finite state machine information of the entry:
• delete—The entry attributes have been deleted.
• dummy—The entry is a new and temporary entry.
• no info—No entry exists.
• normal—The entry is a correct entry.
Host slots (0 in total)
Member IDs of the member devices that have member ports and the total number
of the member devices (excluding the specified member device).
Host ports (1 in total) Member ports, and the total number of the member ports.
(00:03:23)
Remaining aging time for the dynamic member port.
• For a global port, this field is always displayed.
• For a non-global port, this field is displayed if the port is on the master device.
Otherwise, you must specify the slot slot-number option to display this field.
Related commands
reset igmp-snooping group
display igmp-snooping router-port
Use display igmp-snooping router-port to display dynamic router port information.
Syntax
display igmp-snooping router-port [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays dynamic router port information on the master
device.
4
To Next Page
Loading...
Need help?
General
