HP 5900 series Command Reference

Predefined user roles
Usage gu
u can set the DR priority for all interfaces in IPv6 PIM view or for the current interface in interface view.
ver the configuration made in IPv6 PIM view.
Examples
ork.
r-priority 3
hello-
Use hello-option holdtime to set the global IPv6 PIM neighbor lifetime.
ime to restore the default.
Syntax
hello-option holdtime time
PIM neighbor lifetime is 105 seconds.
ser roles
Paramete
n IPv6 PIM neighbor lifetime in the range of 1 to 65535 seconds. If you set the value to 65535
Usage gu
u can set the IPv6 PIM neighbor lifetime for all interfaces in IPv6 PIM view or for the current interface
interface view. The configuration made in interface view takes priority over the configuration made in
Examples
seconds on the public network.
holdtime 120
network-admin
Parameters
priority: Sets a DR priority in the range of 0 to 4294967295. A larger value represents a higher priority.
idelines
Yo
The configuration made in interface view takes priority o
# Set the global DR priority to 3 on the public netw
system-view <Sysname>
[Sysname] ipv6 pim
[Sysname-pim6] hello-option d
Related commands
ipv6 pim hello-option dr-priority
option holdtime (IPv6 PIM view)
Use undo hello-option holdt
undo hello-option holdtime
Default
The global IPv6
Views
IPv6 PIM view
Predefined u
network-admin
rs
time: Sets a
seconds, the IPv6 PIM neighbors are always reachable.
idelines
Yo
in
IPv6 PIM view.
# Set the global IPv6 PIM neighbor lifetime to 120
system-view <Sysname>
[Sysname] ipv6 pim
[Sysname-pim6] hello-option
320

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)