mld-snooping router-port-deny
Use mld-snooping router-port-deny to disable a port from becoming a dynamic router port.
Use undo mld-snooping router-port-deny to restore the default.
Syntax
mld-snooping router-port-deny [ vlan vlan-list ]
undo mld-snooping router-port-deny [ vlan vlan-list ]
Default
A port can become a dynamic router port.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by its
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to
4094. If you specify VLANs, the command takes effect only when the port belongs to the specified
VLANs. If you do not specify a VLAN, the command takes effect on all VLANs.
Examples
# Disable Ten-GigabitEthernet 1/0/1 from becoming a dynamic router port in VLAN 2.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] mld-snooping router-port-deny vlan 2
mld-snooping source-deny
Use mld-snooping source-deny to enable IPv6 multicast source port filtering on a port to discard all the
received IPv6 multicast data packets.
Use undo mld-snooping source-deny to disable IPv6 multicast source port filtering on a port.
Syntax
mld-snooping source-deny
undo mld-snooping source-deny
Default
IPv6 multicast source port filtering is disabled, and the port can connect to both IPv6 multicast sources
and IPv6 multicast receivers.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
228
To Next Page
Loading...
