HP 5900 series - Igmp Robust-Count

Syntax
igmp query-interval interval
undo igmp query-interval
Default
The IGMP general query interval is 125 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets an IGMP general query interval in the range of 1 to 31744 seconds.
Usage guidelines
This command and the query-interval command in IGMP view have the same function but different
effective ranges:
• The query-interval command in IGMP view takes effect on all interfaces.
• The igmp query-interval command takes effect on the current interface.
For an interface, the igmp query-interval command takes priority over the query-interval command in
IGMP view.
Examples
# Set the IGMP general query interval to 60 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp query-interval 60
Related commands
query-interval (IGMP view)
igmp robust-count
Use igmp robust-count to set the IGMP querier's robustness variable on an interface.
Use undo igmp robust-count to restore the default.
Syntax
igmp robust-count count
undo igmp robust-count
Default
The IGMP querier's robustness variable is 2.
Views
Interface view
Predefined user roles
network-admin
99