Syntax
entry-limit limit
undo entry-limit
Default
294967295.
Predefine
snooping forwarding entries, in the range of 0 to
4294967295.
Examples
tries to 512.
<Sysname> system-view
y-limit 512
ave (IGMP-snooping view)
Use fast-leave to enable fast-leave processing globally.
disable fast-leave processing globally.
vlan-list ]
o fast-leave [ vlan vlan-list ]
Default
Predefine
Paramete
specifies a VLAN by its
ge for the VLAN ID is 1
Usage gu
is feature enables the switch to immediately remove a port from the forwarding entry for a multicast
The setting is 4
Views
IGMP-snooping view
d user roles
network-admin
Parameters
limit: Sets the global maximum number of IGMP
# Set the global maximum number of IGMP snooping forwarding en
[Sysname] igmp-snooping
[Sysname-igmp-snooping] entr
fast-le
Use undo fast-leave to
Syntax
fast-leave [ vlan
und
Fast-leave processing is disabled.
Views
IGMP-snooping view
d user roles
network-admin
rs
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item
ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The value ran
to 4094. If you do not specify a VLAN, the command takes effect on all VLANs.
idelines
Th
group when the port receives a leave message.
15
To Next Page
Loading...
