HP 5900 series Command Reference

123
Route/mask: 7.11.0.0/16 (unicast (direct))
RPF interface: Vlan-interface2, RPF neighbor: 8.0.0.2
Total number of (S,G) or (*,G) dependent on this route entry: 4
(7.11.0.10, 225.1.1.1)
(7.11.0.10, 226.1.1.1)
(7.11.0.10, 227.1.1.1)
(*, 228.1.1.1)
Route/mask: 7.12.0.0/16 (multicast static)
RPF interface: Vlan-interface2, RPF neighbor: 8.0.0.3,
Config NextHop: 8.0.0.5
Total number of (S,G) or (*,G) dependent on this route entry: 2
(7.12.0.10, 226.1.1.1)
(7.12.0.10, 225.1.1.1)
Table 39 Command output
Field Descri
p
tion
Route/mask
Route entry. Route types in parentheses include:
• igp—IGP unicast route.
• egp—EGP unicast route.
• unicast (direct)—Direct unicast route.
• unicast—Other unicast route, such as static unicast route.
• multicast static—Static multicast route.
RPF interface Name of the RPF interface.
RPF neighbor IP address of the RPF neighbor.
Config NextHop
Address of the configured next hop. This field is displayed only
when the static multicast route is configured with a next hop.
Total number of (S,G) or (*,G) dependent on
this route entry
Total number of (S, G) or (*, G) entries dependent on the RPF
route and their details.
display pim c-rp
Use display pim c-rp to display C-RP information in the PIM-SM domain.
Syntax
display pim [ vpn-instance vpn-instance-name ] c-rp [ local ]
Views
Any view
Predefined user roles
network-admin
network-operator

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)