HP 5900 series Command Reference

Syntax
last-listener-query-interval interval
undo last-listener-query-interval
Default
The MLD last listener query interval is 1 second.
Views
MLD view
Predefined user roles
network-admin
Parameters
interval: Sets an MLD last listener query interval in the range of 1 to 25 seconds.
Usage guidelines
This command and the mld last-listener-query-interval command have the same function but different
effective ranges:
• The last-listener-query-count command in MLD view takes effect on all interfaces.
• The mld last-listener-query-count command takes effect on the current interface.
For an interface, the mld last-listener-query-count command takes priority over the
last-listener-query-count command in MLD view.
Examples
# Set the global MLD last listener query interval to 6 seconds on the public network.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] last-listener-query-interval 6
Related commands
mld last-listener-query-interval
max-response-time (MLD view)
Use max-response-time to set the maximum response time for MLD general queries globally.
Use undo max-response-time to restore the default.
Syntax
max-response-time time
undo max-response-time
Default
The global maximum response time for MLD general queries is 10 seconds.
Views
MLD view
Predefined user roles
network-admin
280

HP 5900 series Specifications

General

Ports	48x 10/100/1000BASE-T, 4x 10GE SFP+
Switching Capacity	1.28 Tbps
MAC Address Table Size	128K
Routing Protocols	RIP, OSPF, BGP, IS-IS
VLAN Support	4K VLANs
Dimensions	440 x 460 x 44 mm
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (noncondensing)