HP 5900 series - Display Mld-Snooping Router-Port

Field Descri
p
tion
Host slots (0 in total)
Member IDs of the member devices that have member ports and the total number
of the member devices (excluding the specified member device).
Host ports (1 in total) Member ports, and the total number of the member ports.
(00:03:23)
Remaining aging time for the dynamic member port.
• For a global port (including Layer 2 aggregate interfaces), this field is always
displayed.
• For a non-global port, this field is displayed if the port is on the master device.
Otherwise, you must specify the slot slot-number option to display this field.
Related commands
reset mld-snooping group
display mld-snooping router-port
Use display mld-snooping router-port to display dynamic router port information.
Syntax
display mld-snooping router-port [ vlan vlan-id ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays dynamic router port information on the master
device.
Examples
# Display dynamic router port information for VLAN 2.
<Sysname> display mld-snooping router-port vlan 2
VLAN 2:
Router slots (0 in total):
Router ports (2 in total):
XGE1/0/1 (00:01:30)
XGE1/0/2 (00:00:23)
Table 61 Command output
Field Descri
p
tion
Router slots (0 in total)
Member IDs of the member devices that have router ports and the total number of
the member devices (excluding the specified member device).
Router ports (2 in total) Dynamic router ports, and the total number of the dynamic router ports.
201